Need help?Do you have a question about the Integra DRX-2.4 and is the answer not in the manual?
General| Channels | 7.2 |
|---|---|
| Speaker Impedance | 4 - 16 ohms |
| Phono Input | Yes (MM) |
| Subwoofer Pre-Out | 2 |
| Zone 2 Pre/Line Out | Yes |
| Ethernet | Yes |
| Wi-Fi | Yes |
| Frequency Response | 10 Hz - 100 kHz |
| Total Harmonic Distortion (THD) | 0.08% |
| Analog Audio Inputs | 4 |
| USB Input | Yes |
| Bluetooth | Yes |
| Dimensions (W x H x D) | 435 x 173 x 379.5 mm |
| Digital Audio Inputs | Optical: 2, Coaxial: 1 |
| Signal to Noise Ratio | 106dB (line, IHF-A) |
| Weight | 18.3 lbs (8.3 kg) |
Details on updating the unit's firmware via network or USB port.
Identification of front, display, rear panel, and remote controller components.
Procedure for entering characters and symbols using the remote controller.
Diagrams and explanations for 3.1 channel speaker configurations.
Diagrams and explanations for 5.1 channel speaker configurations.
Diagrams and explanations for 7.1 channel speaker configurations.
Diagrams and explanations for 3.1.2 channel speaker configurations.
Diagrams and explanations for 5.1.2 channel speaker configurations.
Guide on connecting speaker cables and setting speaker impedance.
Instructions on connecting an external power amplifier for enhanced audio output.
Steps for connecting the unit to ARC/eARC and Non-ARC TVs.
Examples of connecting AV components with HDMI and audio components.
Connecting a TV (ZONE 2) and an integrated amplifier for separate room audio.
Guide for connecting the unit to a network via wired LAN or Wi-Fi.
Details on connecting IR IN/OUT ports and 12V TRIGGER OUT jacks.
Proper procedure for connecting the unit's removable power cord.
Basic operations for playing audio from connected AV components.
Instructions for pairing and playing audio from Bluetooth devices.
Guide on tuning into AM/FM radio stations automatically and manually.
How to select and adjust listening modes for different audio experiences.
Information on supported audio formats and requirements for USB storage devices.
Instructions for registering and operating the unit using Amazon Alexa voice commands.
Instructions for enjoying audio in a separate room (ZONE 2) simultaneously or separately.
Guide on playing internet radio services like TuneIn Radio.
Overview of the main setup categories and their sub-options.
Configuring TV output, OSD, HDMI, Digital/Analog audio input assignments.
Settings for speaker configuration, crossover, distance, level, and impedance.
Configuration of HDMI, Network, Bluetooth, Power Management, and Trigger settings.
Guided setup process for initial configuration upon first use.
Steps for confirming privacy, selecting connection type, and scanning networks.
Procedures for restarting and resetting the unit to resolve operational issues.
Troubleshooting steps for power-related issues like AMP Diag Mode.
Checks for audio output problems, muting, headphone use, and PCM fixed mode.
Troubleshooting connection and playback issues with Bluetooth devices.
Steps to resolve problems with network services and internet radio access.
Solutions for issues with accessing the wireless LAN network and playback interruptions.
Troubleshooting for USB storage device not being displayed or recognized.
Table showing selectable listening modes for various speaker layouts.
Matrix of audio input formats and their corresponding selectable listening modes.
Detailed explanations of various listening modes like Atmos, DD, DTS, and Stereo.
Table outlining compatible speaker channel combinations with Bi-AMP and ZONE 2.
Technical specifications including power output, impedance, and frequency response.
To Next Page
