Need help?Do you have a question about the Integra DRX-8.4 and is the answer not in the manual?
General| Channels | 11.2 |
|---|---|
| Amplification Type | Class AB |
| THD+N | 0.08% |
| HDMI Inputs | 7 |
| HDMI 2.1 | Yes |
| HDR Support | HDR10, Dolby Vision, HLG |
| eARC | Yes |
| Phono Input | Yes |
| Zone 2/3 Powered Outputs | Yes |
| USB Input | 1 (Front) |
| Ethernet | Yes |
| Wi-Fi | Yes |
| Bluetooth | Yes |
| Standby Power Consumption | 0.15 W |
| Power Output (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC) | 140W |
| Power Output (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven) | 250 W/Ch |
| Input Sensitivity and Impedance | 200 mV/47 kOhms (Line) |
| Signal-to-Noise Ratio | 106dB |
| Speaker Impedance | 4 Ohms – 16 Ohms |
| HDMI Outputs | 3 |
| Digital Audio Inputs | Optical: 2, Coaxial: 1 |
| Pre-Outs | 11.2 Ch |
| Speaker Terminals | 11 |
| Streaming Services | AirPlay 2, Spotify, Tidal, Deezer |
| Voice Control | Amazon Alexa, Google Assistant |
| Room Correction | AccuEQ |
| Supported Audio Formats | Dolby Atmos, DTS:X |
| Weight | 14.5 kg (32 lbs.) |
Guidance for when the unit behaves unexpectedly or freezes.
Comprehensive list of problems and their solutions.
Details on selecting the appropriate speaker layout for installation.
Details speaker compatibility and proper cable connection methods.
Explains how to connect a powered subwoofer to the unit.
Instructions for connecting an external power amplifier to the unit.
Identifies and explains components on the front panel for specific regions.
Identifies and explains components on the front panel for specific regions.
Identifies and explains the connection terminals on the rear panel.
Details the functions and buttons of the included remote controller.
Provides guidance on the alphabetic symbols representing speaker types.
Covers fundamental operations like turning on/off and adjusting volume.
Explains how to select and use different listening modes.
Lists the main categories and their corresponding page numbers for settings.
To Next Page
