Integra DRX-8.4 User Manual

148
SetupSetup
5. Listening Mode Preset5. Listening Mode Preset
You can preset your favorite listening mode to each input. (For example, you can
always apply straight decode to the Dolby TrueHD source of Blu-ray Disc to play
it in unchanged sound eld.)
When the list of input sources is displayed, set the signal type and listening
mode.
Although it is possible to select the listening mode during playback, the selected
mode will be reset when the unit enters standby mode.
 Analog/PCM (Default Value: All Ch Stereo)
Set the listening mode for playing PCM signals of CD and analog signals of
record and cassette tape.
 Dolby (Default Value: Dolby Audio - Surr)
Set the listening mode for playing Dolby Digital, Dolby Digital Plus and Dolby
TrueHD signals.
• Input signals are played as they are input if you select "Straight Decode".
 DTS (Default Value: DTS Neural:X)
Set the listening mode for playing digital audio signals in DTS and DTS-HD
High Resolution formats. Select the listening mode specied for Blu-ray or
such other DTS-HD Master Audio source.
• Input signals are played as they are input if you select "Straight Decode".
 Other (Default Value: Dolby Audio - Surr)
Set the listening mode for playing audio such as DVD-audio and DSD signals.
• Input signals are played as they are input if you select "Straight Decode".
• Available listening modes vary depending on speaker conguration and the
input signal.
• Setting "Last Valid" will always select the last selected mode.
• Only "Analog" can be set to the "TUNER" input. (North American and
Taiwanese models)
• "Digital" and "DSD" can be set to the "NET" input.
• Only "Digital" can be set to the "BLUETOOTH" input.

Integra DRX-8.4 Specifications

General

Channels	11.2
Amplification Type	Class AB
THD+N	0.08%
HDMI Inputs	7
HDMI 2.1	Yes
HDR Support	HDR10, Dolby Vision, HLG
eARC	Yes
Phono Input	Yes
Zone 2/3 Powered Outputs	Yes
USB Input	1 (Front)
Ethernet	Yes
Wi-Fi	Yes
Bluetooth	Yes
Standby Power Consumption	0.15 W
Power Output (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)	140W
Power Output (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)	250 W/Ch
Input Sensitivity and Impedance	200 mV/47 kOhms (Line)
Signal-to-Noise Ratio	106dB
Speaker Impedance	4 Ohms – 16 Ohms
HDMI Outputs	3
Digital Audio Inputs	Optical: 2, Coaxial: 1
Pre-Outs	11.2 Ch
Speaker Terminals	11
Streaming Services	AirPlay 2, Spotify, Tidal, Deezer
Voice Control	Amazon Alexa, Google Assistant
Room Correction	AccuEQ
Supported Audio Formats	Dolby Atmos, DTS:X
Weight	14.5 kg (32 lbs.)