EasyManuals Logo

Integra DRX-8.4 User Manual

Integra DRX-8.4
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Before starting the procedure
What's in the box
A Main unit (1)
B Remote controller (RC-989R) (1), Batteries (AAA/R03) (2)
C Speaker setup microphone (1)
Used during Initial Setup.
D Indoor FM antenna (North American and Taiwanese models) (1)
E AM loop antenna (North American and Taiwanese models) (1)
F Power cord (1)
Initial Setup Guide (1)
* This is an online user manual. This is not supplied with the product.
Note
Connect speakers with an impedance of 4 Ω to 16 Ω.
The power cord must be connected only after all other connections are
completed.
We will not accept any responsibility for damage arising from the connection
with equipment manufactured by other companies.
Network services and content that can be used may no longer be available
if new functions are added by updating rmware or the service providers
terminate their services. Also, available services may di󰀨er depending on
your area.
Details on the rmware update will be posted on our website and through
other means at a later date.
The illustrations in this manual use those of North American models unless
otherwise mentioned.
Specications and appearance are subject to change without prior notice.

Table of Contents

Other manuals for Integra DRX-8.4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-8.4 and is the answer not in the manual?

Integra DRX-8.4 Specifications

General IconGeneral
Channels11.2
Amplification TypeClass AB
THD+N0.08%
HDMI Inputs7
HDMI 2.1Yes
HDR SupportHDR10, Dolby Vision, HLG
eARCYes
Phono InputYes
Zone 2/3 Powered OutputsYes
USB Input1 (Front)
EthernetYes
Wi-FiYes
BluetoothYes
Standby Power Consumption0.15 W
Power Output (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)140W
Power Output (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)250 W/Ch
Input Sensitivity and Impedance200 mV/47 kOhms (Line)
Signal-to-Noise Ratio106dB
Speaker Impedance4 Ohms – 16 Ohms
HDMI Outputs3
Digital Audio InputsOptical: 2, Coaxial: 1
Pre-Outs11.2 Ch
Speaker Terminals11
Streaming ServicesAirPlay 2, Spotify, Tidal, Deezer
Voice ControlAmazon Alexa, Google Assistant
Room CorrectionAccuEQ
Supported Audio FormatsDolby Atmos, DTS:X
Weight14.5 kg (32 lbs.)

Related product manuals