EasyManuals Logo

Integra DRX-8.4 User Manual

Integra DRX-8.4
218 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #178 background imageLoading...
Page #178 background image
178
Troubleshooting
Before starting the procedure
Problems may be solved by simply turning the power on/o󰀨 or disconnecting/
connecting the power cord, which is easier than working on the connection,
setting and operating procedure. Try the simple measures on both the unit and
the connected device. If the problem is that the video or audio is not output or
the HDMI linked operation does not work, disconnecting/connecting the HDMI
cable may solve it. When reconnecting, be careful not to wind the HDMI cable
since if wound the HDMI cable may not t well. After reconnecting, turn o󰀨 and
on the unit and the connected device.
The AV receiver contains a microPC for signal processing and control
functions. In very rare situations, severe interference, noise from an external
source, or static electricity may cause it to lockup. In the unlikely event that
this happens, unplug the power cord from the wall outlet, wait at least 5
seconds, and then plug it back in.
Our company is not responsible for damages (such as CD rental fees) due to
unsuccessful recordings caused by the unit’s malfunction. Before you record
important data, make sure that the material will be recorded correctly.

Table of Contents

Other manuals for Integra DRX-8.4

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Integra DRX-8.4 and is the answer not in the manual?

Integra DRX-8.4 Specifications

General IconGeneral
Channels11.2
Amplification TypeClass AB
THD+N0.08%
HDMI Inputs7
HDMI 2.1Yes
HDR SupportHDR10, Dolby Vision, HLG
eARCYes
Phono InputYes
Zone 2/3 Powered OutputsYes
USB Input1 (Front)
EthernetYes
Wi-FiYes
BluetoothYes
Standby Power Consumption0.15 W
Power Output (8 Ohms, 20 Hz-20 kHz, 0.08% THD, 2 Channels Driven, FTC)140W
Power Output (6 Ohms, 1 kHz, 10% THD, 1 Channel Driven)250 W/Ch
Input Sensitivity and Impedance200 mV/47 kOhms (Line)
Signal-to-Noise Ratio106dB
Speaker Impedance4 Ohms – 16 Ohms
HDMI Outputs3
Digital Audio InputsOptical: 2, Coaxial: 1
Pre-Outs11.2 Ch
Speaker Terminals11
Streaming ServicesAirPlay 2, Spotify, Tidal, Deezer
Voice ControlAmazon Alexa, Google Assistant
Room CorrectionAccuEQ
Supported Audio FormatsDolby Atmos, DTS:X
Weight14.5 kg (32 lbs.)

Related product manuals