Integra DRX-3.4 - Page 140

140
SetupSetup
8. Miscellaneous
 4. Initial Setup
Make the initial setup from the setup menu.
• Wait for a while if "Initial Setup" cannot be selected. It can be selected when
the network function is activated.
 5. Lock
Lock the Setup menu so that the settings cannot be changed.
 Setup Parameter (Default Value: Unlocked)
Lock the Setup menu so that the settings cannot be changed.
Locked The menu is locked.
Unlocked The menu is unlocked.
 6. Factory Reset
All the settings are restored to factory defaults.
 Factory Reset (Default Value: -)
All the settings are restored to factory defaults.
Select "Start" and press Enter.
• If "Factory Reset" is performed, your settings are restored to the default
values. Be sure to note down your setting contents beforehand.