Integra DRX-3.4 - Page 151

151
Setup
1
2
5
6
4
3
1 The speaker currently being adjusted. To adjust another speaker, tap the " "
next to it and select another speaker.
2 Displays the Menu screen. From the menu, you perform actions such as reset
the speaker adjustments and cancel and exit the adjustments. You can also
copy data from other slots.
3 Drag the points on the equalizer curve side to side to change the frequency
and up or down to change the boost.
• You can add a point by tapping on the curve where there isn't a point.
4 Recalculate the characteristics from the adjusted content.
5 Transfer the adjusted content to the unit.
6 The value of the point being adjusted. Tap the "
" next to the point to delete
it.
5. When adjustment is nished, tap 4 to recalculate, then tap 5 to transfer the
adjusted data to the unit.
• In the Setup menu, when the number of speaker channels, etc., is changed in
"2. "Speaker" - "Conguration", the adjusted content is deleted.
Using an equalizer you have registered
When you select a saved slot in "Room EQ" - "Dirac Live"( →p75) in Quick
Menu, you can use the registered equalizer.