Need help?Do you have a question about the Intek M-110 PLUS and is the answer not in the manual?
General| Brand | Intek |
|---|---|
| Model | M-110 PLUS |
| Category | Transceiver |
| Language | English |
Details the EC Certificate of Conformity for the product according to specific directives.
Confirms compliance of the INTEK M-110 PLUS with applicable technical regulations and EC directives.
Provides contact details and identification numbers for the manufacturer and the notified body.
Advises users to read the owner's manual before operation for correct usage and regulatory compliance.
Offers congratulations and an overview of the INTEK M-110 PLUS transceiver's features and design.
Lists all items included in the transceiver package to ensure completeness upon receipt.
Details the AM/FM selector and the CH9/CH19 emergency channel selector switch.
Explains the TX/RX indicators and the LED display for channel and frequency band codes.
Describes the UP and DN keys for channel selection and quick channel change functionality.
Details the Squelch control for noise reduction and the Volume knob for audio level and power ON/OFF.
Specifies the microphone connector on the front panel for attaching the dynamic microphone.
Describes the EXT (External Speaker) Jack, ANTENNA Connector, and 13.2VDC Power Cord input.
Explains the operation of the PTT (Push-to-Talk) key for transmitting and returning to receive mode.
Warns against opening the unit or making internal modifications, advising professional service for repairs.
Guidance on selecting a location and securely mounting the main unit in the vehicle.
Instructions for connecting the DC power cable and the RF antenna coaxial cable correctly.
A checklist of steps to verify correct operation after installation, including testing transmission.
Step-by-step instructions for selecting and confirming a different frequency band code.
Procedure to reset the radio to the default CE European frequency band (code 06).
Updated information on specific usage regulations and licensing for various European countries.
Details general parameters like channel count, frequency range, operating temperature, and physical size.
Outlines receiver performance metrics including IF, sensitivity, audio output, and signal/noise ratio.
Lists transmitter capabilities such as maximum RF power, modulation types, and current drain.
To Next Page
