MS-CHAP-V2
This parameter specifies the authentication protocol operating over the PEAP tunnel.
1. User Credentials: Select one of the following options:
Use Windows logon, Prompt each time I connect,
or
Use the following.
2. Click Next to open the PEAP Server settings.
TLS
Transport Layer Security authentication is a two-way authentication method that exclusively uses digital
certificates to verify the identity of a client and a server.
1. Obtain and install a client certificate, See
Set up the Client for TLS authentication or consult your system
administrator.
2. Select one of the following to obtain a certificate:
Use my smart card, Use the certificate issued to this
computer, or Use a user certificate on this computer.
3. Click Next to open the PEAP Server settings.
Step 2 of 2: PEAP Server
To Next Page
Loading...