Intel 80386

LOCAL BUS INTERFACE
Prior to its first instruction fetch, the 80386 makes no internal requests to the bus, and,
therefore,
will relinquish bus control if it receives a HOLD request (see Section 3.7 for a
complete description of
HOLD cycles).
Interrupt requests
(INTR and NMI) are not recognized before the first instruction fetch.
Table 3-7. Output Pin States during RESET
Pin Name
Pin State
LOCK#. D/C#. ADS#. A31-A2 High
W/R#. M/IO#. HLDA. BE3#-BEO# Low
D31-DO
Three-State
3-39