Intel 845GV

¾ Init Display First
When boot-start the first time detect device
Default: PCI slot
¾ Onboard FDC Controller
Setup onboard FDC controller Default: Enabled
¾ Onboard Serial Port ½
Setup onboard serial Port ½ Default: 3F8/IRQ4
¾ UART Mode Select
Setup UART mode select Default: Normal
¾ Onboard Parallel port
Setup select parallel port Default: 378/IRQ7
¾ Parallel Port Mode
Setup parallel port mode Default: SPP
¾ Game/Midi Port Address
Setup game/MIDI port address Default: 201/330
¾ Midi Port IRQ
Setup MIDI port IRQ Default: 10
6.6 Power Management Setup
¾ ACPI Function
Setup if use ACPI function Default: Enabled
¾ Video off Method
Setup video off method Default: DPMS
¾ Video off in Suspend
Setup when video off in suspend Default: Yes
¾ Suspend Type
Setup suspend type Default: Stop Grant
¾ MODEM Use type
Setup modem use IRQ Default: 3
¾ Soft-Off by PWR-BTTN
Setup soft-off type Default: Instant-Off
¾ Power On by Ring
Setup if use mode wake up Default: Enabled
¾ USB KB Wake-Up From S3
Setup if use USB keyboard wake-up from S3 Default: Enabled
6.7 PnP/PCI Configurations
¾ Reset Configuration Data
When select Enabled the BIOS restart write system configuration data
Default: Disabled
¾ Resources Controlled By
System resources parameter setup Default: Auto (ESCD)
¾ PCI/VGA Palette Snoop
PCI/VGA card color setup Default: Disabled