Setting up the Build System
Intel Atom® Processor E3900 SoC Family/Intel® Celeron® Processor N3350/Intel® Pentium® Processor N4200/
Intel® Celeron® Processor J3355 & J3455
Getting Started Guide October 2018
Page 10 Document Number: 334828-002US
3. Use the following commands to install the necessary tools:
$ sudo apt-get install gawk wget git-core diffstat unzip \
texinfo gcc-multilib build-essential chrpath socat
$ sudo apt-get install libsdl1.2-dev xterm
$ sudo apt-get install make xsltproc docbook-utils fop
dblatex xmlto
$ sudo apt-get install autoconf automake libtool
libglib2.0-dev
$ sudo apt-get install xutils-dev nfs-common
4. Create and add the following configuration under
/home/<username>/.gitconfig by using the following:
[user]
email = <your.name>@<your_domain>.com
name = <Your Name>
[sendemail]
smtpserver = <Your organization’s SMTP server address>
signedoffcc = false
suppresscc = all
chainreplyto = false
assume8bitEncoding = utf-8
from = <Your Name> <your.name@your_domain.com>
confirm = always
[color "grep"]
match = red
[color]
diff = auto
ui = auto
interactive = auto
grep = always
[alias]
co = checkout
br = branch
ci = commit
st = status
ol = log -- oneline
[core]
editor = gedit OR vi
#uncomment the gitproxy variable below if you require a
gitproxy
#gitproxy = /home/<username>/bin/gitproxy