ATX12V Power Supply Design Guide
Version 2.0 Final Review Copy
43
8.2. International
The vendor must provide a complete CB certificate and test report to IEC 60950: 3rd ed.,
1999. The CB report must include ALL CB member country national deviations. CB
report must include evaluation to EN 60950: 2000. All evaluations and certifications must
be for reinforced insulation between primary and secondary circuits.
8.3. Proscribed Materials
Cadmium should not be used in painting or plating.
No quaternary salt electrolytic capacitors shall be used.
Mercury shall not be used.
The use of CFCs or HFCs shall not be used in the design or manufacturing process.
To Previous Page
Loading...