Intel Celeron 847

31
The optional settings: [Enabled]; [Disabled].
Use this item to enable or disable CPU C6 (ACPI C3) report to OS.
► SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFan Configuration:
CPUFAN 3/4 Pin Fan Select/ SYSFAN1 3/4 Pin Fan Select / SYSFAN2 3/4 Pin
Fan Select
The optional settings are: [3 Pin];[4 Pin].
CPUFAN / SYSFAN1/ SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/ SYSFAN2 Full Speed Temperature
Use this item to set CPUFAN/SYSFAN1/SYSFAN2 full speed temp. Fan will run at
full speed when above this temperature.
CPUFAN / SYSFAN1/ SYSFAN2 Idle Temperature
Use this item to set CPUFAN/SYSFAN1/SYSFAN2 idle speed temperature. Fan
will run at idle speed when below this temperature.
CPUFAN / SYSFAN1/ SYSFAN2 Idle Duty
The above items are for user to set respective fan duty when below idle
temperature.