Intel Cyclone 10 GX FPGA - Page 44

Figure 12. The System Info tab
The following sections describe the controls of the System info tab
Board Information
The Board Information control displays static information about your board:
• Board Name: Indicates the official name of the board given by BTS
• Board P/N: Indicates thr part number of the board
• Serial Number: Indicates the serial number of the board
• Board Revision: Indicates the revision of the board
• MAC Address: Indicates MAC Address of the board
System MAX Control
MAX Ver: Indicates the vesion of Intel MAX 10 code currently running on the board.
The Intel MAX 10 code resides in the <package dir>\examples\max10 directory.
Newer revisions of this code may be available on the Intel Cyclone 10 GX FPGA
Development kit link on the Intel website.
The Intel MAX 10 register control allows you to view and change the current Intel MAX
10 register values as described in the table below. Change to the register values with
the GUI take effect immediately.
5 Board Test System
UG-20105 | 2017.12.18
Intel
®
Cyclone
®
10 GX FPGA Development Kit User Guide
44