Intel Stratix 10 FPGA

Introduction
The Intel® Stratix® 10 GX FPGA
Development Kit, which comes with a
one-year license for the Intel Quartus®
Prime software, provides all that you
need to begin developing
high-performance designs. You can
use this development kit to:
• Develop and test PCI Express*
(PCIe*) 3.0 designs using the
PCI-SIG*-compliant development
board.
• Develop and test memory
subsystems consisting of DDR4,
DDR3, QDR IV, and RLDRAM III
memories.
• Develop modular and scalable
designs by using the FPGA
mezzanine card (FMC) connector
to interface to a FMC mezzanine
card provided by Intel® partners
and supporting protocols, such as
JESD204B, Hybrid Memory Cube,
Serial RapidIO*, Gigabit Ethernet
(10GbE), SONET, Common Public
Radio Interface (CPRI), OBSAI, and
many others.
To obtain the exact device part
number, refer to the development
kit website: www.intel.com/content/
www/us/en/programmable/products/
boards_and_kits/dev-kits/altera/kit-
s10-fpga.html.
Intel® Stratix® 10 FPGA
Development Kit
What’s in the Box
Hardware
The development kit includes the
following hardware:
• Intel Stratix 10 GX FPGA
development board
- Quad small-form-factor
pluggable (QSFP) interface
connector
- FMC low-pin count (LPC + 16
transceivers) connector
- PCIe x16 edge connector
- Serial digital interface (SDI)
connectors
- Mini DisplayPort
- HiLo memory interface
- Ethernet PHY
• HiLo memory daughtercards
• FMC loopback card supporting
transceiver,LVDS, and
single-ended I/Os
• AC adapter power cables
• Ethernet and USB cables
Software
Download and install the Intel
Stratix 10 GX FPGA Development
Kit installer to obtain the following
items:
• Design examples
- Board Update Portal design
- Board Test System (BTS)
design
• Documentation
- Intel Stratix 10 GX FPGA
Development kit user guide
 - Boarddesignles
• Download and install design
software
- Intel Quartus Prime software
(required)
- Nios® II processor (optional)
- Mentor Graphics*
ModelSim*-Intel FPGA
software (optional)
You can download the kit installer directly from
www.intel.com/content/www/us/en/programmable/products/boards_and_kits/dev-kits/altera/
kit-s10-fpga.html
A Complete Development Environment
Downloadable Content
Quick start guide

Intel Stratix 10 FPGA Specifications

General

Family	Stratix 10
Category	FPGA
Technology Node	14 nm
Transceivers	Up to 144
Power Consumption	Varies by configuration

Summary

Introduction

Development Kit Capabilities

Highlights key features like PCIe 3.0, memory subsystems, and modular interfaces.

Whats in the Box

Hardware Components

Lists the physical hardware included in the development kit.

Software Components

Lists the software included with the development kit for download.

Getting Started with Your Development Kit

Powering the Board

Explains the two modes of operation for powering the development kit.

Using the Board Update Portal

Guides on using the portal for software and flash memory updates.

Using the BTS

BTS Interface

Details on accessing and using the Board Test System interface.

Power Measurement Tool

Explains how to use the tool to monitor FPGA power consumption.

Related Links

Kit-specific Resources

Provides links to resources specific to the Intel Stratix 10 GX FPGA Development Kit.

General Design Resources

Offers links to broader design resources and community forums.