Intel D102GGC2 Specification Update

Intel
®
Desktop Board D102GGC2 Specification Update
4
Summary Table of Changes
The following table indicates the Specification Changes, Errata, Specification Clarifications, or
Documentation Changes that apply to the Intel
®
Desktop Board D102GGC2. Intel intends to fix
some of the errata in a future revision of the desktop board, and to account for the other
outstanding issues through documentation or specification changes as noted. This table uses
the following notations:
CODES USED IN SUMMARY TABLE
Doc: Document change or update that will be implemented.
PlanFix: This erratum may be fixed in a future revision of the desktop board,
driver, or BIOS.
Fixed: This erratum has been previously fixed.
NoFix: There are no plans to fix this erratum.
Shaded: This erratum is either new or modified from the previous version of the
document.
NO. PLANS SPECIFICATION CHANGES
1 Doc Change Section 1.5.4.1, Parallel ATA IDE Interface
2 Doc Change Section 2.7.1 Back Panel Connectors
3 Doc Change Section 3.3.2 PCI IDE Support
NO. PLANS ERRATA
There is not characterized erratum for this product.

Intel D102GGC2 Specifications

General

Number of memory slots	2
Maximum internal memory	2 GB
Supported memory clock speeds	400, 533 MHz
Processor socket	LGA 775 (Socket T)
Number of SATA connectors	4
ATX Power connector (24-pin)	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	1
Firewire (IEEE 1394) ports	0
Power source type	ATX
Audio output channels	- channels
Motherboard form factor	micro ATX
Compatible operating systems	Microsoft Windows XP/2000
On-board graphics card	No
Parallel processing technology support	Not supported
Networking features	Fast Ethernet

Weight and Dimensions

Depth	218.44 mm
Width	243.84 mm