Intel D102GGC2 Specification Update

Intel
®
Desktop Board D102GGC2 Specification Update
v
i
PREFACE
This document is an update to the specifications contained in the Intel
®
Desktop Board
D102GGC2 Technical Product Specification (Order number D44278). It is intended for hardware
system manufacturers and software developers of applications, operating systems, or tools. It
will contain Specification Changes, Errata, Specification Clarifications, and Documentation
Changes.
Refer to the Intel
®
Pentium
®
4 Processor Specification Update (Order number 249199) for
specification updates concerning the Intel Pentium 4 processor and that may apply to the
desktop board D102GGC2. Unless otherwise noted in this document, it should be assumed that
any processor errata for a given stepping are applicable to the Altered Assembly (AA) revision(s)
associated with that stepping.
Refer to the ATI website for product advisories for specification updates concerning the Radeon
Xpress 200 that may apply to the desktop board D101GGC2 . Unless otherwise noted in this
document, it should be assumed that any northbridge or southbridge errata for a given stepping
are applicable to the Altered Assembly (AA) revision(s) associated with that stepping.
Nomenclature
Specification Changes are modifications to the current published specifications. These
changes will be incorporated in the next release of the specifications.
Errata are design defects or errors. Characterized errata may cause the desktop board
D102GGC2’s behavior to deviate from published specifications. Hardware and software
designed to be used with any given Altered Assembly (AA) and BIOS revision level must assume
that all errata documented for that AA and BIOS revision level are present on all desktop
boards.
Specification Clarifications describe a specification in greater detail or further highlight a
specification’s impact to a complex design situation. These clarifications will be incorporated in
the next release of the specifications.
Documentation Changes include typos, errors, or omissions from the current published
specifications. These changes will be incorporated in the next release of the specifications.

Intel D102GGC2 Specifications

General

Number of memory slots	2
Maximum internal memory	2 GB
Supported memory clock speeds	400, 533 MHz
Processor socket	LGA 775 (Socket T)
Number of SATA connectors	4
ATX Power connector (24-pin)	Yes
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Parallel ports quantity	1
Firewire (IEEE 1394) ports	0
Power source type	ATX
Audio output channels	- channels
Motherboard form factor	micro ATX
Compatible operating systems	Microsoft Windows XP/2000
On-board graphics card	No
Parallel processing technology support	Not supported
Networking features	Fast Ethernet

Weight and Dimensions

Depth	218.44 mm
Width	243.84 mm