Intel Desktop Board D865GVHZ Product Guide
74
Hard Disk Drives Submenu
Main Advanced Security Power Boot Exit
1
st
Drive [xxxxxxxxxxxxx]
2
nd
Drive [xxxxxxxxxxxxx]
3
rd
Drive [xxxxxxxxxxxxx]
4
th
Drive [xxxxxxxxxxxxx]
Specifies the boot
sequence from the
available devices. Select
the boot device with
UpArrow or DownArrow key.
Press Enter to set the
selections as the intended
boot device. ARMD = ATAPI
Removable Media Device.
Select Screen
Select Item
Select
Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
The submenu shown in Table 30 is for setting hard disk drives.
Table 30. Hard Disk Drives Submenu
Feature Options Description
1
st
Hard Disk Drive
(Note)
Dependent on installed
hard drives
Specifies the boot sequence from the available hard disk
drives. To specify boot sequence:
1. Select the boot device with <> or <>.
2. Press <Enter> to set the selection as the intended
boot device.
Note: This boot device submenu appears only if at least one boot device of this type is installed. This list will display up to
12 hard disk drives, the maximum number of hard disk drives supported by the BIOS.
To Next Page
Loading...
Need help?
General
