EasyManuals Logo

Intel I350-T2 User Manual

Intel I350-T2
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #86 background imageLoading...
Page #86 background image
Diagnostics information may include the following items:
Item Description
PWA
Number
The Printed Wire Assembly number identifies the adapter's model and version.
MAC
Address
The unique Ethernet address assigned to the device.
Memory The memory address assigned by the BIOS for memory-mapped adapter access.
I/O The I/O port address assigned by the BIOS for I/O-mapped adapter access.
IRQ The hardware interrupt assigned by the system BIOS.
UNB The address in upper memory where the Boot Agent is installed by the BIOS.
PCI ID The set of PCI identification values from the adapter in the form:
VendorID/DeviceID/SubvendorID/SubdeviceID/Revision
Slot The PCI bus address (slot number)reported by the BIOS.
NOTE: The number displayed is the BIOS version of the PCI slot number. Therefore, actual
positions of NICs withinphysical slots may not be displayed as expected. Slots are not
always enumerated in an obvious manner, and this will only report what is indicated by the
BIOS.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Intel I350-T2 and is the answer not in the manual?

Intel I350-T2 Specifications

General IconGeneral
CategoryNetwork Interface Card
Ports2
Data Transfer Rate1Gbps per port
ConnectorRJ-45
Controller ProcessorIntel I350
Wake-On-LANYes
Operating Systems SupportedWindows, Linux, FreeBSD, VMware
Operating Temperature0°C to 55°C
Product NameIntel I350-T2
InterfacePCI Express 2.1
Form FactorLow Profile
IEEE Standards802.3, 802.3u, 802.3ab
FeaturesVirtualization
Power Consumption4.4 W

Related product manuals