20 Intel Responsiveness Technologies - Dell Setup Guide
b
Confirm that the system BIOS is set to AHCI mode or RAID on mode
(or in some system BIOS menus, this mode may be called
Smart
Response mode
or
Rapid Start mode
).
NOTE: If the system is in ATA mode, Smart Response cannot be configured until the
mode is changed. The procedure for changing SATA modes after Windows installation
is generally outside the scope of this document, however, "Appendix B" on page 40
provides suggested methods that may help on some systems.
2
Windows
: From the Start menu, type "Disk Mangement" in the "Search
programs and files" field, and select the "Create and format hard disk
partitions" option.
IRT.book Page 20 Thursday, June 21, 2012 2:25 PM
To Next Page
Loading...
Need help?
General
