Intel Nuc 11 Pro Kit User Manual

1. Slide the new 2.5″ drive into the drive bay, ensuring the SATA connectors are fully seated into the connectors of the SATA daughter card (A).
2. Secure the drive into the drive bay with the two small silver screws that were included in the box (B). Set the drive bay bracket down inside the chassis (C).
Close the Chassis
After all components have been installed, close the Intel NUC chassis. Intel recommends this be done by hand with a screwdriver to avoid over-tightening and possibly damaging
the screws.
Use the VESA Bracket (Optional)
Follow these instructions to attach and use the VESA mount bracket:
1. Using the four small black screws that were included in the box, attach the VESA bracket to the back of the monitor or TV.

Intel Nuc 11 Pro Kit Specifications

General

Brand	Intel
Model	Nuc 11 Pro Kit
Category	Desktop
Language	English