Intel NUC6i3SYK User Manual

Intel NUC Kit NUC6i3SYK & NUC6i5SYK User Guide
3
This guide tells you how to:
• Install and remove memory
• Install an M.2 SSD
• Install a VESA mount bracket
• Connect power
• Install an operating system
• Install the latest device drivers and software
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC6i3SYK and NUC6i5SYK have two 260-pin DDR4 SO-DIMM sockets. Memory
requirements:
 1.2V low voltage memory
 2133 MHz SO-DIMMs
 Non-ECC
For a list of tested memory, go to the System Memory page on the Support site:

Intel NUC6i3SYK Specifications

General

Brand	Intel
Model	NUC6i3SYK
Category	Desktop
Language	English