Intel NUC6i7KYK Quick Start Guide

Intel® NUC Kit NUC6i7KYK Fan Replacement Steps
Perform the following fan replacement steps at an ESD safe workstation with the Intel NUC disconnected
from AC power.
To remove the existing fan:
1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
2. Disconnect the fan connector from the motherboard fan header.
3. Peel back the black tape from the top of the fan assembly towards the memory slots. Do not
completely remove the tape.

Intel NUC6i7KYK Specifications

General

Processor	Intel Core i7-6770HQ
Graphics	Intel Iris Pro Graphics 580
Dimensions	211 mm x 116 mm x 28 mm
Memory	up to 32GB
Storage	M.2 SSD (PCIe x4 NVMe or SATA), 2.5" HDD/SSD (SATA)
Connectivity	Intel Wireless-AC 8260 + Bluetooth 4.2
Ports	4x USB 3.0, 1x HDMI 2.0, 1x Mini DisplayPort 1.2
Audio	7.1 digital audio via HDMI and Mini DisplayPort, Headphone/Microphone jack
Ethernet	Intel i219-V 10/100/1000 Mbps Ethernet
Card Reader	SDXC card slot with UHS-I support
Power Supply	19V
Operating System Support	Windows 10