Intel NUC7i3DNKE - Installing and Removing Memory

User Guide for NUC7i3DNKE, NUC7i5DNKE, and NUC7i7DNKE
3
Open the Intel NUC Chassis
To open the Intel NUC chassis, follow these steps:
1. Unscrew the four corner screws on the bottom cover of the chassis and lift the cover.
Installing and Removing Memory
Intel NUC Kits NUC7i3DNKE, NUC7i5DNKE, and NUC7i7DNKE have two 260-pin DDR4 SO-DIMM sockets.
Memory requirements:
 1.2V low voltage memory
 1866 or 2133 MHz SO-DIMMs
 Non-ECC
Find compatible memory modules in the Intel® Product Compatibility Tool:
 For Intel NUC Kit NUC7i3DNKE
 For Intel NUC Kit NUC7i5DNKE
 For Intel NUC Kit NUC7i7DNKE