Intel NUC7i5DNKPC User Manual

User Guide for NUC7i5DNKPC
3
This guide tells you how to:
• Upgrade memory (RAM)
• Change/install an M.2 SSD
• Use a VESA mount bracket
• Connect power
• Set up Microsoft® Windows® 10
• Install the latest device drivers and software
• Recover the operating system
Open the Chassis
Unscrew the four corner screws on the bottom of the chassis and lift the cover.
Upgrade System Memory
The Intel NUC Kits NUC7i5DNKPC have two 260-pin DDR4 SO-DIMM sockets, pre-installed with two
4GB DDR4 2133 MHz SO-DIMM.
To upgrade memory, be sure to select memory modules that meet these requirements:
 1.2V low voltage memory
 2133 MHz SO-DIMMs
 Non-ECC

Intel NUC7i5DNKPC Specifications

General

Brand	Intel
Model	NUC7i5DNKPC
Category	Desktop
Language	English