Intel® Optane™ Memory M Series
Installation & User Guide February 2021
10 345866-002US
Step 1: After enabling UEFI in the Boot Settings, set the SATA Mode to Intel® RST Premium…
Step 2: Make sure that remapping for the port (PCIe connector) that contains the Intel® Optane™ memory device is
Enabled.
Notes:
• If the ‘slower media’ being accelerated is a supported PCIe NVMe drive, remapping must be enabled for this
port/device as well
• This setting may not be available in the BIOS until the storage hardware is connected to the motherboard/system
To Next Page
Loading...
