Intel Pentium N4200 - Page 8

Setting up the Build System
Intel Atom® Processor E3900 SoC Family/Intel® Celeron® Processor N3350/Intel® Pentium® Processor N4200/
Intel® Celeron® Processor J3355 & J3455
Getting Started Guide October 2018
Page 8 Document Number: 334828-002US
2. Perform this step only if the build system is behind a corporate network with a
proxy server.
a. Add the following lines in the /etc/environment:
$ sudo gedit /etc/environment
export SOCKS_SERVER=socks://<proxy server IP or DNS>:<socks
port number>
export HTTP_PROXY=http://<proxy server IP or DNS>:<http
port number>
export HTTPS_PROXY=https://<proxy server IP or DNS>:<https
port number>
export FTP_PROXY=http://<proxy server IP or DNS>:<ftp port
number>
b. Edit the .bashrc file and append to the proxy settings using the following:
$gedit ~/.bashrc
# Insert the below lines in ~/.bashrc
export SOCKS_SERVER=socks://<proxy server IP or DNS>:<socks
port number>
export HTTP_PROXY=http://<proxy server IP or DNS>:<http
port number>
export HTTPS_PROXY=https://<proxy server IP or DNS>:<https
port number>
export FTP_PROXY=http://<proxy server IP or DNS>:<ftp port
number>
export export HTTP_DIRECT=localhost,127.0.0.0/8,<your
network subnets>
export SOCKS_DIRECT=$HTTP_DIRECT
export NO_PROXY=$HTTP_DIRECT
export ALL_PROXY=$HTTP_DIRECT
export socks_server=$SOCKS_SERVER
export http_proxy=$HTTP_PROXY
export https_proxy=$HTTPS_PROXY
export ftp_proxy=$FTP_PROXY
export http_direct=$HTTP_DIRECT
export socks_direct=$SOCKS_DIRECT
export no_proxy=$NO_PROXY