10
14 To update the modem driver, double-click the Modems device in the
Device Manager.
15 Right click the Intel modem and click Properties. On the dialog that
appears, click the Driver tab.
16 Repeat steps 6 through 12 above.
17 Close the Device Manager, and click OK on the System Properties
window to close it.
18 Modem users only, Go to Start, Programs, Intel PRO/100 Mobile
adapter.
19 Click Intel Country Identifier. The utility scans for modems. After a
few moments the country dialog appears.
20 Select your country from the pull-down list and click Save and then
Exit.
Run the Intel Setup program onthe Intel CD to install the Intel PROSet
utility.
Type III Adapters Only
1 With computer power on, insert your new adapter as described in
Chapter 1.
2 Connect the network cable and modem cable if it is a combo card.
3 Windows detects the adapter. The Add New Hardware Wizard starts.
Follow the prompts in the wizard to install the drivers from the Intel
CD.
4 Restart your computer when prompted
5 If you are not in the U.S. or Canada, run the Country Identifier utility
to specify your location. The utility is located in the Intel Mobile
program group.
Run the Intel Setup program onthe Intel CD to install the Intel PROSet
utility.
For most networks, you will need to configure properties for your protocols,
computer identification, and preferred servers. Contact your network
administrator for details if you need assistance.
To Next Page
Loading...
Need help?
General