19
5. Add Target. Go back to the General tab, select the adapter to which
you want to add a target and click Add Target. You can connect to a
maximum of eight targets and the adapters must connect to different
targets. Connecting multiple adapters (from the same machine or a
different machine) can result in an unwanted consequence, such as
data loss, target disconnection, system crash (Windows) or an
inability to mount the drives (Linux). A dialog box will appear that
allows you to describe where and how you want to connect to a new
target (router). Enter the new target's IP address and port. If you want
to enable CHAP security, see the Intel PRO/1000 T IP Storage
Adapter User Configuration Guide for details.
NOTE: The adapter software guarantees the ability to connect to as many
as eight targets whose names each consist of a maximum 256
characters. However, some network configurations may allow the
adapter to connect to more than eight targets.
To Next Page
Loading...
