Intel HCX Go WiFi 7 BE200 User Manual

Quick installation
guide
For HCX Go WiFi 7 Intel
BE200 Wireless Adapter
Card
www.hcx-eu.com
Developed and designed by HCX.
This product is protected by HCX’s pending or
registered patents and trademarks.
BUSINESS
NETWORKS
Manuel de prise
en main rapide
Pour Carte WiFi PCIe
interne HCX Go WiFi 7
Intel BE200
EN
FR

Intel HCX Go WiFi 7 BE200 Specifications

General

Frequency Bands	2.4 GHz, 5 GHz, 6 GHz
Maximum Data Rate	5.8 Gbps
Bluetooth Support	Bluetooth 5.4
MU-MIMO	Yes
Security	WPA3
Wireless Protocol	802.11be

Summary

Quick Installation Guide

Product Compatibility Notice

Hardware Installation

Connect F_USB Cable

Connect the included F_USB cable to the WiFi card's 4-pin connector.

Install Card into PCIe Slot

Insert the WiFi card into an available PCIe slot on the motherboard.

Connect F_USB Header

Connect the other end of the F_USB cable to an available F_USB header on the motherboard.

Connect Antennas

Connect the two antennas to the WiFi card and orient them perpendicularly for optimal coverage.

Drivers Download

Drivers Installation

Launch WiFi Driver Installation

Launch the WiFi drivers installation program for your operating system.

Complete WiFi Driver Installation

Follow onscreen instructions to complete WiFi driver installation, may require admin privileges.

Launch Bluetooth Driver Installation

Launch the Bluetooth (BT) drivers installation program.

Complete Bluetooth Driver Installation

Follow onscreen instructions to complete Bluetooth driver installation, may require admin privileges.