Intel PRO1000 - MT Dual Port Server Adapter User Manual

7
Installing the Software
You can install the software in a Microsoft* Windows* 2000, XP or
RedHat* Linux Version 7.2 environment.
Installing the Software in Windows* 2000
When you install or reinstall the Intel
®
PRO/1000 T IP Storage Adapter
driver, the control panel applet is also installed. This software allows you to
configure your adapter and targets. If you have uninstalled the driver and
want to reinstall it, you must restart your computer before following the
installation steps below. Once you have installed the Intel
®
PRO/1000 T IP
Storage Adapter in your computer, connected the cable, plugged in the
power cord, and powered on your computer, the Found New Hardware
window will appear on your screen.
To install the driver and software, follow these steps:
1. Turn on the computer with the adapter installed.
2. In the Found New Hardware Wizard window, click Next.

Intel PRO1000 - MT Dual Port Server Adapter Specifications

General

Ports	2
Interface	PCI/PCI-X
Data Rate	10/100/1000 Mbps
Connector	RJ45
Chipset	Intel 82546EB
Port Type	Gigabit Ethernet
Full Duplex	Yes
Jumbo Frames	Yes
Wake-on-LAN	Yes
Product Type	Network Adapter
Operating Systems Supported	Windows, Linux, FreeBSD