Intel
®
Server Board S5000VSA User’s Guide 11
Power Supply
A minimum of 550 Watts is required. Your supply must provide a minimum of 3A of 5V
standby current or the board will not boot.
Optional Hardware
Hard Disk Drives
The server board supports different hard disk drive options, depending on the version of
the server board purchased.
• The Intel
®
Server Board S5000VSASATA/S5000VSASATAR provides six SATA
ports and one IDE connection. The six SATA ports are near the front left side of the
server board. The IDE connection supports one or two ATA-133 devices. IDE
devices can be connected to the standard IDE connector located near the SATA
ports.
• The Intel
®
Server Board S5000VSASAS/S5000VSASASR provides four SAS ports
and one IDE connection. The four SAS ports are near the front left side of the server
board. The IDE connection supports one or two ATA-133 devices. IDE devices can
be connected to the standard IDE connector located near the SAS ports.
• The Intel
®
Server Board S5000VSASCSI/S5000VSASCSIR provides six SATA
ports, one IDE connection and an LSI Logic* LSI20320-R-B single channel Ultra
320 SCSI controller.
See the documentation included with your server chassis for additional drive information
and drive installation instructions.
Intel
®
Local Control Panel
The Intel
®
Local Control Panel provides enhanced system control by utilizing a LCD
display, which provides additional controls and indicators beyond the standard control
panel.
To Next Page
Loading...
