Intel Solid-State Drive User Manual

Intel
®
Solid-State Drive
Installation Guide 7
Intel
®
Solid-State Drive
Intel Data Migration Software works with Intel SSDs only. If you receive an error message,
make sure that you have an Intel SSD connected to your computer. If you have an Intel SSD
connected to your computer and still receive an error message, contact Intel support. See
“Additional Support” on page 10.
Intel Data Migration Software identifies your SSD and verifies that the used space on your
current storage device is the same or smaller than the available space on your SSD.
4. Click Clone Now.
The data migration starts. During this process, you will be prompted to reboot your computer.
Figure 8. Reboot screen
5. Click Reboot.
As your computer reboots, the migration process continues.
View the progress bar to see the status of the data migration. The length of the procedure
corresponds to the amount of data on the drive being transferred.
6. Once the operation completes, shut down your computer when prompted. Proceed to “Swap
Your Drives” on page 8.
Figure 9. Data Migration Successful screen
Intel Data Migration Software
Synchronizing with operating system:
[############################] 100%
Congratulations!
The cloning process completed successfully.
You can power off your system now and install
the cloned Intel SSD into your system.
Press any key to shut down the computer.

Intel Solid-State Drive Specifications

General

Brand	Intel
Model	Solid-State Drive
Category	Storage
Language	English