Need help?Do you have a question about the Intel SSR212MA and is the answer not in the manual?
Overview of the storage system's functional components and block diagram.
Details the features of the Intel® Server Board SE7520JR2 used in the system.
Describes the features and specifications of the two 8-port PCI-X to SATA Host Bus Adapters.
Details the features of the backplane supporting up to twelve SATA hot-swap hard drives.
Explains the enclosure management controller and its associated features.
Provides an overview of the power supply enclosure and its capacity for redundant power modules.
Defines the power and current ratings for the 500 Watt continuous power supply.
Specifies the voltage limits for steady state and dynamic loading conditions.
Details the capacitive loading ranges the power supply must meet for stability.
Describes the power supply's protection circuits like OCP, OVP, and OTP.
Explains the fan control capabilities, speeds, and response to ambient temperature.
Describes the twelve 3.5-inch SATA hard drive bays and their configuration.
Details the 512 MB Disk On Module (DOM) used for the OS and SAN application software.
Lists the internal cables and connectors provided, including SATA cables.
Details the rear I/O ports available on the chassis, such as LAN and USB.
Provides pin-out definitions for SATA Host Backplane connectors.
Outlines product safety compliance and EMC requirements for commercial markets.
Details compliance with RoHS directive regarding banned substances.
Summarizes system operating and non-operating environment specifications.
Lists environmental tests performed on the system as per Intel standards.
Summarizes operating and non-operating limits for temperature, humidity, and shock.
To Next Page
General
