Feature Summary Intel® Storage System SSR212MA
16 Revision 1.4
1.11 Rack and Cabinet Mounting Options
The chassis was designed to support cabinets that are 19 in (483 mm) wide by up to 36 in (914
mm) deep, and are compliant to the SSI Server Rack specification and EIA 310-D. A set of
Rack Mounting Rails are provided and will accommodate either square or round hole rack
mounting methods.
When mounting the system into a cabinet, the front mount brackets are attached to the front of
the chassis, and a set of rear support brackets are attached to the back of the cabinet. This
allows the weight of the system to be as evenly distributed as possible.
Figure 9. Rack Mounting
To Next Page
Loading...
Need help?
General
