Care and safety
» Follow all instructions in the manual for installation and handling of the product.
» Carry out the installation in environments that are not susceptible to factors such as rain, fog and water splashes.
» Wireless communication technology, when exposed to environments with high power radiation, may suffer interference
and have its performance impaired. Example: locations near TV towers, AM/FM radio stations, amateur radio stations, etc.
» Do not install the alarm center and its accessories near radio frequency equipment such as routers, repeaters and/or Wi-Fi
signal ampliers. The alarm center and its devices must maintain a minimum distance of 2 meters from these equipment.
» Do not install the alarm center facing air conditioning or heating equipment.
» Do not expose directly to sunlight.
» Only clean the external part of the device, using only a damp cloth (do not use chemical solvents).
» Do not subject the device to excessive pressures or knocks/drops.
» Check whether the installation site, the indicator LED of the devices ashes green when activated.
» Avoid installation on metallic surfaces so as not to attenuate the transmission signal between system devices.
» The installation and conguration of the alarm center and the other products that make up this system must be carried
out by a qualied professional.
» Perform periodic tests on it, in order to validate weather conditions, battery level and other factors, so that the site
monitored by the system is always able to operate correctly.
» LGPD - General (Personal) Data Protection Regulation: Intelbras does not access, transfer, capture, or carry out any other
type of personal data processing from this product.
To Next Page
Loading...
