Intelbras AMT 8000 - Page 154

154
If the PIN is incorrect the chip will be locked.
Enter + 825 + O + PIN number with 4 digits + Enter , where O = 1 or 2 (Operator
1 or Operator 2)
» Heartbeat GPRS interval (link test)
Enter + 827 + TTM + Enter , onde TTM = Heartbeat interval time from 000 to 255
minutes (default 005 minutes )
» DNS Servers for GPRS
Enter + 828 + S + Enter , where S = 1 or 2 (Server 1 or Server 2)
After entering the command, enter the DNS server code (according to the server
used) and then press the Enter key to conrm.
» Interval between GPRS connections attempts
Enter + 829 + TG + Enter , where TG = interval time of reconnection attempts from
00 to 20 (standard 00 minutes )
Program SMS
» Program GPRS channel options to enable chips and SMS sending/receiving
Enter + 832 + Enter
After the command, use the keys on the keyboard to enable 1 (chip 1), 2 (chip 2), 3
(send SMS), 4 (receive SMS) options and press the Enter key to conrm.
» Select SMS events
Enter + 833 + Enter
After the command, use the keys on the keyboard to enable 1, 2, 3, 4 options and
press the Enter key to conrm.
» Program phone to SMS
Enter + 84 + M + Phone number with up to 20 digits + Enter , where M = memory
number ranging from 1 to 5
The phone number must be a maximum of 20 digits and in format: 0 + operator
code + area code + phone number starting with the digit 9.
» Change display name of alarm center
Enter + 1 + Active + 00 + Enter
After the command, use the keyboard to change the name of the alarm center to
be displayed in the SMS message.