Intelbras AMT 8000 - Page 23

23
Range RF Amplier (REP 8000 Repeater)
Optional dedicated accessory for amplifying the RF range between the AMT 8000
alarm center and the other devices. Communication between the repeater and the
center is made through a wireless signal, providing a simpler installation and long
communication range. Repeater can be installed at a distance of 600 meters from
the alarm center without barriers and the other devices at 600 meters from the
repeater, also without barriers. Extending the range of the alarm center from 600
m to 1200 m without barriers.
Features:
» Range: up to 600 m with direct view in open eld.
» Amplier of the coverage area of the AMT 8000 system.
» Protection against malicious signals.
» Cryptography in data transmission between devices.
» Easy installation and handling.
» Amplication of the RF signal up to 600 meters beyond the maximum limit for
communication with the alarm center, so with the use of the amplier a device
can communicate at a distance of up to 1.2 kilometers with the alarm center in
the case of direct view and without barriers.
» Rechargeable battery.
» Includes 7 Vdc/500 mA source.
Important: each AMT 8000 alarm center can have up to 4 repeaters operating
simultaneously, but all in separate operation from each other, so there is no
possibility of one repeater being used to extend the signal to another, only in direct
use between devices and alarm center.