Intelbras AMT 8000 - Page 32

32
5.4. Partitioning
Using this feature through alarm center programming you can split it into up to
16 independently activated and deactivated partitions and associate any of the 64
wireless zones with any of the partitions. You can also program passwords giving
specic permissions to these partitions.
This function is useful in ofces, residences or other places in the same building
that need more alarm centers, because with the partitioning, the center is split
and each partition operates individually, as if it were an independent alarm center.
The 16 partitions can be controlled via keyboard, remote control, software and
applications compatible with the AMT 8000 unit, because one partition can be
activated or deactivated without inuencing the other.
When the system is partitioned, the zones and any of the other wireless devices
in the 8000 line can be split as shown below (for more information, refer to the
section 6.10. Zone settings.
» Common: The zone does not belong to any of the partitions. It will only be
activated when all partitions are activated and will be deactivated whenever one
of the sixteen partitions is deactivated.
Example: In an ofce divided by two professionals, one room is dened
for Partition 01, and another for Partition 02 and reception as a common
zone. This way, even if one of the people leaves and activates their partition,
reception will still be disabled and will only be activated when the other
partition is also activated.
» Partition (01 to 16): Wireless devices registered in the zones dened to belong
to any of the 16 partitions will have access to or be inuenced by the chosen
partition.
Example: in a gallery composed of 8 rooms, each room will have its own
independent partition with specic zones, with independent activation and
deactivation. In this scenario each partition can have independent sirens
and keyboards or share devices between partitions (common sirens and
keyboards).