36
Deactivation by master password or full password
If you are using the master password or a full password (which has permission to
enable/disable all partitions), there are two ways of deactivation:
» All partitions: enter the password and all partitions will be disabled.
» Only desired partition: press the
Disable + Partition (01 to 16) + Password
key
and the chosen partition within the range (01 to 16) will be disabled.
The zones, which must be passed until the keyboard is reached, must be
programmed as entry timers or as followers so that the alarm not to be triggered
immediately when the keyboard access path is violated/accessed. After entering
the protected area by an entry time zone, the entry time will start and the user
must enter a valid password on the keyboard before the time limit ends, to avoid
triggering the alarm and reporting the corresponding events. Refer to the
Zones
functions
section to set as timed.
Activation/deactivation by user-specic password
Specic passwords can be programmed to activate/deactivate a Partition (between
01 and 16). In this case, just enter the password to activate/deactivate the
corresponding partition.
On activation, the output time will start and the partition will be active at the end
of the programmed time.
On deactivation, the keyboard must be accessed for a time zone if necessary and
the password must be entered before the end of the programmed time in order to
avoid triggering and reporting events.
Remote control activation/deactivation
To activate/deactivate the system by remote control, it must be registered with the
alarm center, as described in section
Wireless devices (register/delete).
The control is factory set so that button 1 only deactivates the alarm center, button
2 only activates and button 3 disabled. The remote control will have the same
permissions as the user password it is associated with (user 00 to 97).
5.6. Menu
Alarm center has a
Menu
function to make it easier to view the status and perform
some commands. When accessing one of the options if you want to return to the
Main
menu press the
Back
or
Exit
key to go to the Home screen.