94
838
+
Enter
+
Partition Enter
+
01 to 16
Use the keyboard to set the days for partition autoactivation occurs, so that the
numbers you want to have the days enabled remain checked and the days with the
disabled function remain unchecked, then conrm with the
Enter
key.
Note:
in the above command for non-partitioned alarm center, use Partition = 01.
Autoactivation time
Select the time on which Partition Autoactivation will occur.
To program this function, type:
462
+
Enter
+
Partition Day Hours Minutes Enter
+ + + +
01 to 16 00 to 23
1 to 8 00 to 59
Note:
in the above command for non-partitioned alarm center, use Partition = 01.
To edit/view the programmed value, type:
462
+
Enter
+
Partition Day
+
01 to 16
1 to 8
Enter
+
After changing the congured value, press the
Enter
key. If you only want to view
the setting, press the
Back/Exit
key that no programming will be changed.
Weekdays for Autodeactivation
Select the days on which Partition Autodeactivation will occur.
To Next Page
Loading...
