Intellian t110Q User Manual

t110W/t130W – Marine Satellite Television System
126
• Wi-Fi Access Point Conguration.
- SSID : The SSID is the network name shared among
all devices in a wireless network. The SSID must be
identical for all devices in the wireless network. It is case-
sensitive and must not exceed 32 alphanumeric charac-
ters, which may be any keyboard character. Make sure
this setting is the same for all devices in your wireless
network.
- Channel : Select an appropriate channel from the list
provided to correspond with your network settings. All
devices in your wireless network must use the same
channel in order to function correctly. Try to avoid con-
icts with other wireless networks by choosing a channel
where the upper and lower three channels are not in use.
- Authentication Type : Module supports an authentication
mode that the 802.11 device uses when it authenticates
and associates with an access point or IBSS cell.
- Password : Wi-Fi access password.
- Max Stations : Setting max stations.
• Network Service Conguration.
- Telnet Service : Enable or disable telnet login support.
- HTTPS Port : HTTPS port number.
3
Sys Log Conguration
Set the Syslog Conguration.
Antenna makes log messages according to emergency
level. When this function is enabled, your management
server receives the log messages.
• Management Server : Syslog function enable/disable.
• Server IP : Management server IP address.
• UDP Port : Management port.
• Message Type : Select message type(Intellian message
level) to send management server (The lower level is
more emergency).
• Syslog Target Level : If you select this target level, the
Server receives log message equal or less than this level.

Intellian t110Q Specifications

General

Brand	Intellian
Model	t110Q
Category	TV Antenna
Language	English