64
Diagnosis Code :
CODE 101 : The data communication between the antenna and the ACU is tested.
CODE 102 : The azimuth motor is tested.
CODE 103 : The elevation motor is tested.
CODE 104 : The cross-level motor is tested.
CODE 105 : The azimuth encoder is tested.
CODE 106 : The cross-level encoder is tested.
CODE 107 : The gyro sensor is tested.
CODE 108 : The tilt sensor is tested.
CODE 109 : The sensor box motor is tested.
CODE 110 : The LNB is tested .
CODE 111 : The LNB skew motor is tested.
CODE 112 : The sub-reector is tested.
CODE 113 : The antenna power is tested.
CODE 114 : The ACU power is tested.
CODE 115 : The receiver power is tested.
Test result:
•
2
••-••••••••••
•
Test means passed. – Test means skipped. ? Test means under process.
Refer No. 2 to the diagnosis code 102 as shown above for occurred error explanation.