73
OPERATING THE ACU
1) Verication Method
AGC – use signal level for satellite tracking.
DVB LOCK – use DVB Lock for satellite tracking.
DVB DECODE – use DVB Decode for satellite tracking.
DSS DECODE – use DSS Decode for satellite tracking.
2) Voltage Supply Method
AUTO- supply 13V or 18V to LNB.
ONLY 13V – always supply 13V to LNB.
ONLY 18V – always supply 18V to LNB.
3) DISEQC Method
AUTO – supply 0kHz or 22kHz to LNB.
ONLY 0KHZ – always supply 0kHz to LNB.
ONLY 22KHZ - always supply 22kHz to LNB.
To Next Page
Loading...
