SELECT PROCESS TYPE*
BACKUP USER DATA: To backup the antenna settings set by user to the ACU.
RESTORE USER DATA: To restore the antenna by using the backup user data
stored from the ACU.
DEFAULT ACU-REMOTE P/W: to default ID and Password of the Web Server.
UPGRADE FROM USB: to upgrade the system by using the rmware les from
a specied folder in the USB ash drive.
COPY LOG TO USB: to copy the antenna log data from the system to the USB
ash drive.
BACKUP TO USB: To backup the antenna settings to a specied folder in the
USB ash drive.
RESTORE FROM USB: To restore the antenna by using the backup user data
from a specied folder in the USB ash drive.
UPGRADE ACU-REMOTE: To upgrade the system using the Aptus Web rmware le
from a specied folder in the USB ash drive.
NOTE: UPGRADE FROM USB, COPY LOG TO USB, BACKUP TO USB, RESTORE FROM USB and
UPGRADE ACU-REMOTE options are displayed only if the USB ash drive is plugged into the USB
port located in the front panel of the ACU.
To Next Page
Loading...
Need help?
General
