To Next Page

To Previous Page

OPERATING THE ACU

Heading

Latitude & longitude

Save

LATITUDE LONGITUDE

37.00N 126.50E

5. Set the current LATITUDE and LONGITUDE

Press LEFT and RIGHT arrow keys until the desired character is underscored (selected).

Press UP and DOWN arrow keys to increase or decrease the value. Or press NUMBER keys

to set the desired value directly. Press the OK key to set the parameter.

HEADING

000.0

6. Entry of ship’s heading is not required when your system is connected to a NMEA(0813)

or NMEA2000 Heading Gyrocompass output. Ensure that the supported Gyro Type is set

correctly.

For v240, if the ship’s gyrocompass output is Step-by-Step (SBS) or Synchro, separate

purchase of a gyro converter is required.

SAVE ?

YES NO

7. Press LEFT arrow key to move cursor to YES and press OK key to save current settings.

Or move cursor to NO and press OK key to abort and return to the main display.

Intellian v240C User Manual

Questions and Answers: