Intellian v240C User Manual

v240C – Marine Satellite Communication System
96
Setting Modem Port
System MENU
Modem port Menu
Set Mediator &
Modem type
Setup MENU
SETUP MODE ?
YES NO
1. Press LEFT arrow key to move cursor to YES and press OK key to enter SETUP MENU.
+ANTENNA +SATELLITE
+SYSTEM +INSTALLATION
2. Press DOWN arrow key to move cursor to SYSTEM MENU and press OK key to enter it.
+SET LOCAL +SET LOCATION
+MODEM PORT +MANAGEMENT
3. Press DOWN arrow keys to move cursor to COM. PORT Menu and press OK key to enter it.
USE MEDIATOR MODEM TYPE
NO I DIRECT-I/O
4. USE MEDIATOR is to enable the usage of MEDIATOR if the antenna is connected to the
Intellian Dual VSAT Mediator.
NOTE: USE MEDIATOR must be disabled if there is no MEDIATOR connected to the ACU. Improper
setting of this parameter will cause your ACU’s Modem interface to work incorrectly.
Modem TYPE* is to select a proper data communication port and protocol on the ACU to
interface with the satellite Modem. The settings related to the Modem interface will be set
automatically once the Modem type is selected.
The options on the next page will be displayed and required to be set if "USER SETTING" is
selected.
USE MEDIATOR*
• NO
• MEDIATOR-ANT
• MEDIATOR-MODEM
• MEDIATOR-ALL
Modem TYPE*
• USER SETTING
• IDIRECT-I/O
• IDIRECT-AMIP
• COMTECH-I/O
• COMTECH-ROSS
• SATLINK-SERIAL
•SATLINK-VACP
• ELEKTRIKOM-AMIP
• GILAT-SERIAL
• IPSTAR-SOTM

Intellian v240C Specifications

General

Brand	Intellian
Model	v240C
Category	Marine Radar
Language	English