Why can't I connect to my Intellinet Wireless Access Point?
There could be a few reasons why you're unable to connect to the wireless access point. First, if encryption is enabled, double-check your WEP or WPA passphrase settings on your wireless client. Second, try moving closer to the wireless access point. Finally, try unplugging the power plug of the access point and plugging it back in after 10 seconds.
What to do if Intellinet 525404 Wireless Access Point is not responding in a web browser?
If your Intellinet Wireless Access Point isn't responding when you try to access it through a web browser, try the following: 1. Check that the power cord and network cable are correctly and firmly inserted. 2. If all the LEDs are off, check the A/C power adapter to ensure it's correctly powered. 3. Ensure you're using the same IP address section as the access point. 4. If you're using a MAC or IP address filter, try connecting with another computer; if it still doesn't work, perform a hard reset by pressing the Reset button. 5. Set your computer to obtain an IP address automatically (DHCP) to see if it gets an IP address. 6. If this happened after a firmware upgrade, contact your dealer for assistance. 7. If none of these steps work, contact your dealer for further help.
What to do if I can't log on to the Intellinet 525404 Wireless Access Point web interface because of a wrong password?
If you are unable to log on to the web management interface due to a password issue, ensure you're connecting to the correct IP address of the access point. Also, remember that the password is case-sensitive, so check that Caps Lock is off. If you've forgotten the password, perform a hard reset.
Why is my Intellinet Wireless Access Point file download so slow?
If file downloads are slow or frequently interrupted when using your Intellinet Wireless Access Point, try resetting the access point. Also, check if other computers on your local network are transferring large files, as this can impact network speed. You might also try changing the channel number.
How to locate my Intellinet Wireless Access Point with my wireless client?
If you're having trouble locating your Intellinet Wireless Access Point with your wireless client, first check if “Broadcast ESSID” is set to “Off.” Next, ensure the antenna is properly installed and secured. Also, consider the distance from the access point and try moving closer. Finally, remember that if ESSID broadcast is disabled, you need to manually enter the ESSID on your wireless client.
Why is my Intellinet Wireless Access Point getting hot?
It's normal for the access point to become warm. This is not a malfunction. If you can keep your hand on the access point’s chassis, it’s okay. However, if you smell something burning or see smoke coming from the access point or A/C power adapter, disconnect it from power (if it’s safe to do so) and contact your dealer for assistance.
General| Model | 525404 |
|---|---|
| Type | Wireless Access Point |
| Frequency Band | 2.4 GHz |
| Data Rate | Up to 300 Mbps |
| Security | WEP, WPA, WPA2 |
| Operating Modes | Access Point, Client, WDS, Repeater |
| Power Supply | 12 V DC, 1 A |
| Weight | 180 g |
| Wireless Standard | IEEE 802.11n |
| Ports | 1 x 10/100 Mbps Ethernet |
To Next Page
