Inteno EX400 User Manual

VERSION 1.2
Content:
Connections:
Ethernet connection: WAN, red color
Ethernet connection: LAN, yellow color
USB 2.0
Reset switch
Power plug connector
Power switch ON/OFF
WAN
USB
RESET OFF
ON
LAN
For more information, please visit
www.intenogroup.com/ex400
WIFI MULTI DEVICE
EASY INSTALLATION
EX400
RF Exposure Statement: The minimum distance between the user and/or any bystander and
the radiating structure of the transmitter is 20cm.
RF Output Power /Frequence usage: All operational modes: 2.4GHz: 802.11b, 802.11g,
802.11n (HT20), 802.11n (HT40), 5GHz: 802.11a, 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80)
The frequency, mode and the maximum transmitted power in EU: 2400 MHz – 2483.5 MHz: 19.99
dBm (EIRP), 5150 MHz – 5250 MHz: 22.91 dBm (EIRP), 5250 MHz – 5350 MHz: 22.91 dBm (EIRP), 5470
MHz – 5725 MHz: 29.95 dBm (EIRP)
RF Restriction: In EU, 5150 to 5350 MHz is restricted to indoor.

Inteno EX400 Specifications

General

Wireless Frequency Bands	2.4 GHz, 5 GHz
Max Data Rate	1200Mbps
Type	Network Router
WAN Ports	1
LAN Ports	4
Wireless Standard	IEEE 802.11ac
Maximum Wireless Speed	1200 Mbps
Security	WPA, WPA2
Power Supply	12V DC
USB Ports	1
Wireless Standards	IEEE 802.11a/b/g/n/ac
Ports	4 x LAN, 1 x WAN, 1 x USB
Antennas	2

Summary

Device Usage Modes

Router and Access Point Mode

Configure the EX400 as a router by connecting it to your Internet service provider.

Wireless Repeater Mode

Utilize the EX400 as a wireless repeater by placing it in a suitable location.

Wired Extender Mode

Connect the EX400 via Ethernet to your router for enhanced wired performance.

EX400 Installation Guide

Wireless Installation via WPS

Install the EX400 wirelessly using the WPS button for quick pairing with your router.

PC-Based Configuration

Configure the EX400 via a PC by connecting to its LAN port and accessing a specific IP address.

Optimal EX400 Placement